top of page

Second Hand Machines

4-roll Plate Bending Machine

Brand HAEUSLER, Type VRM-hy 2500x20/18 mm

1633 VRM-hy 2500x12 (2).JPG

No. 2147

 

Year of construction: 1988

 

Features:

  • optical display for roller position

  • central lubrication

  • cone bending device

  • Over-run brake

4-Roll Plate Bending Machine

Brand HAEUSLER, Typ VRM-hy 3000 x 12 mm

DJO_6353.JPG

No. 2152

 

Year of construction: 1984

 

Features:

  • digital display for roller position

  • central lubrication

  • cone bending device

  • CNC-Control

3-roll Plate Bending Machine

Brand SCHÄFER, Type SRMVHY 3000x15/12 mm

Runbiegemaschine Bendingmachine VRM

No. 2145

 

Year of construction: 1980

 

Features:

 

  • ƒall 3 rolls are powered

  • digital display for roller position

  • mobile control

  • cone bending device

  • upper cylinder supporting device

  • side cylinder supporting device

4-roll Plate Bending Machine

Brand HAEUSLER, Type VRM-hy 5000 x 40/30 mm

Runbiegemaschine Bendingmachine VRM

No. 2144

 

Year of construction: 1984

 

Features:

 

  • ƒstepless working speed

  • central lubrication

  • interchangeable top roll ø 380 mm

  • upper cylinder supporting device

  • side cylinder supporting device

4-roll Plate Bending Machine

Brand HAEUSLER, Type VRM-hy 4000 x 35/30 mm

Runbiegemaschine Bendingmachine VRM

No. 2142

 

Rev. 2010, test in plant 2017

 

Features:

 

  • ƒcone bending device

  • central lubrication

  • instant brake

4-Roll Plate Bending Machine

Brand HAEUSLER, Type VRM-hy 3000 x 110/90 mm

Runbiegemaschine Bendingmachine VRM

No. 2141

 

Year of construction: 1990

 

Features:

 

  • CNC control

  • central lubrication

  • cone bending device

  • upper cylinder supporting device

  • 2 side cylinder supporting devices

  • mobile infeed roller table

4-roll Plate Bending Machine

Brand Haeusler, Type VRM-hy 3000 x 60/50 mm

370_3000_1954_2.jpg

No. 2126

 

Year of construction 2007

 

Features:

  • Air cooling of the hydraulic oil

  • Automatic pressure compensation between top and bottom roll

  • 2 driven rolls
    4 digital displays for side roll position

  • 2 digital displays for bottom roll position

  • Safety against over load of the machine

  • Bending pressure of bottom roll adjusted by control

  • Upper cylinder supporting device, hydraulic height adjustable

  • for max. bending diameter 5’500 mm max. lifting power  15 tomin. supporting diameter 1’800 mm

4-roll Plate Bending Machine

Brand Haeusler, Type VRM-hy 3500 x 65/55 mm

Runbiegemaschine Bendingmachine VRM

No. 2098

 

Year of construction 1981, machine revision 2009, test in plant 2012

 

Features:

 

  • ƒƒLateral side supports, each with
    3 supporting rolls

  • Machine designed for exchangeable top roll up to min. Ø 450 mm

  • ƒƒCone bending device

4-Roll Plate Bending Machine

Brand HAEUSLER, Typ VRM-hy 3000 x 120 mm

2150.jpg

No. 2150

 

Year of construction: 1990

 

Features:

  • Cone bending attachment

  • 2 driven rolls

  • Central lubrication automatic

  • Backlash break for rotation of rolls

  • 2 electro-optical for side roll position

  • 2 digital displays for bottom roll position

  • Safety to avoid movement of bottom roll during open bearing

  • Instant brake for roller rotation

  • Stepless speed control for roller adjustment

  • Machine Device for later installation of interchangeable

  • top rolls diameter of Ø 820 mm +Ø 740 mm

3-roll Plate Bending Machine

Brand HM-HAEUSLER, Typ SIHRV 2000 x 13/10 mm

Runbiegemaschine Bendingmachine VRM

No. 2130

Year of construction 2001

 

Features:

 

  • horizontal and vertical applicable, with decoiler

  • decoiler is powered and hydraulically adjustable on decoiler diameter

 

Section Bending Machine

Brand HM-Neuwe, Type HPR 315

Runbiegemaschine Bendingmachine VRM

No. 2121

 

New Machine

 

Features:

 

  • 1 universal bending roll set, e.g. angle,leg outside 100 x 100 x 10 Ø min. 1’400 mm

  • Digital display of the roller adjustment

  • Adjustable pressing roll support electrohydraulic from the mobile control desk including digital display

Mechanised aligning, assembling and welding system

Brand HAEUSLER, Type Crocodile Standard

Runbiegemaschine Bendingmachine VRM

No. 2124

 

Year of construction 2002, top condition

For assembling of cylindrical sections and wind mill towers

 

Features:

 

  • Diameter range: max. 6'000 mm, min. 1'500 mm

  • Length: max. 3'000 mm, min. 1'200 mm

  • Wall thickness: max. 70 mm, min. 20 mm

Equipment for Assembling of Shell-to-Shell or Head to Shell

Brand HAEUSLER, Type Clamp Standard

Runbiegemaschine Bendingmachine VRM

No. 2123

 

Year of construction 2007, top condition

Equipment for assembling medium weight cylindrical sections and wind mill towers.

 

Features:

 

  • Diameter range: max. 5'500 mm, min. 1'800 mm

  • Length: max. 3'000 mm, min. 1'500 mm

  • Wall thickness: max. 40 mm, min. 10 mm

4-Roll Plate Bending Machine

Brand HAEUSLER, Type VRM-hy 3000 x 60/50 mm

Runbiegemaschine Bendingmachine VRM

No. 2138

 

Year of construction 2000

 

Features:

 

  • ƒdigital display for roller position

  • central lubrication

  • aircooling

  • upper plate supporting device

  • lateral plate supporting device

3-Roll Plate Bending Machine

Brand FACCIN, Type HAV/S 3190

Runbiegemaschine Bendingmachine VRM

No. 2136

 

Year of construction 2006

 

Features:

 

  • ƒbend/prebend capacity to full width of 3000 mm 140/90 mm

  • digital display for roller position

  • top roller vertically adjustable

4-roll Plate Bending Machine

Brand HAEUSLER, Type VRM-hy 3000 x 30/25 mm

Runbiegemaschine Bendingmachine VRM

No. 2128

Year of construction 1980

 

Features:

 

  • ƒcone bending device

  • central lubrication

  • backslash break

 

4-roll Plate Bending Machine

Brand HAEUSLER, Type VRM-hy 4000 x 16/15 mm

Runbiegemaschine Bendingmachine VRM
sold.png

No. 2110

Year of Construction 1999, test in plant 2012

 

Features:

 

  • ƒCNC-control

  • cone bending device

  • central lubrication

Combined 3-roll Plate Bending and Section Bending Machine

Brand HAEUSLER, Type KRMA 2500 x 20 mm

Runbiegemaschine Bendingmachine VRM

No. 2105

 

Overhauled by HAEUSLER 2011

Year of construction 1964

 

Features:

 

  • ƒƒƒ3-Roll Plate Bending Machine,Size 2500 x 20 mm bending capacityƒƒ

  • complete new electric

  • Optical clock for adjustable rollƒƒ

  • Cone bending device

bottom of page